I am sorry for the long stretch between posts. It has been busy here and I’m not sure where the time has gone.
In addition to Patchwork Country 1 from Digistamps4Joy, I used the following products to create my card: Lyra Rembrandt Polycolor Pencils, CTMH My Acrylix™ Blessed Beyond Measure Stamp Set (S1609) – the September 2016 Stamp Of The Month which is available from September 1 through September 30, 2016 and card stock and a card base from my stash.
I used these pencil colors: 07 – Lemon, 13 – Light Orange, 17 – Vermilion, 28 – Rose Madder Lake, 47 – Light Blue, 53 – Peacock Blue, 61 –Viridian, 63 –Emerald Green, 70 – Apple Green, 74 – Cedar Green, 80 – Raw Umber, 83 – Gold Ochre, 85 – Light Ochre, 89 – Cinnamon, 91 – Pompeian Red, 93 – Burnt Carmine, 96 – Cool Silver Grey and 97 – Medium Grey.
If Facebook Progressive Challenges are new to you, you still have a day or so to purchase Patchwork Country 1 for $1 and join us over at the Digistamps4Joy Stamping Facebook Group. It is fun to see the different ways folks use the same image.
FYI, the links above are not affiliate links; I have been able to keep up with the Progressive Challenge and receive the next month’s digi for free when I share a project created with the current month’s digi.
If you have a minute please leave a comment. I like to read what people think of my creations. Thanks for visiting today.
As I mentioned yesterday, I watched a video by Linda Parker on how to create an Envelope Punch Board Treat Mug. When that video ended YouTube queued her video for making something similar, this time a tea cup, Tea Anyone? After I created the coffee mug in Cricut® Design Space I tried the tea cup.
Instead of stamping and heat embossing as Linda did in her video, I found an image I could use with the writing tool, Floral Bud Decorative Element – #M28D1C6 from Anna’s Garden Cards and Embellishments, and used the Cricut® Gold Marker.
Again, except for a couple of snips, all of the cutting and scoring, including the tea cup handle and the circle to cover the cup base, was done on the Cricut® Explore using the free Insert Shapes. I did use the WRMK Envelope Punch Board so the bottom of the cup tapered (I could not think about about all of the slicing and testing of the cut and I need to use my Envelope Punch Board more). Here’s what my cardstock looked like before I started to assemble.
I think I should have also punched the last bit on the left, but I was afraid I was going to cut through and remove the bottom tab. I ended up snipping around there a bit after the cup was assembled.
The cardstock is from my stash. The doily is Doily – #M3B515 from the Cricut® Artiste Collection (Z3170) – retiring July 31, 2016.
If you would like to make your own tea cup, my CDS file (without the Floral Bud and Doily) is https://us.cricut.com/design/#/canvas/42546822; please watch Linda’s video for assembly instructions. Here is a screen shot of my CDS screen with the score line measurements added.
I like this idea for birthdays. The cut is not large enough to hold a gift card (unless you don’t mind it sitting in the center of the cup and poking out of the top), but it is a nice size for jewelry – unless it is a huge piece.
While I am not an affiliate for other shopping sites, I am a Close To My Heart Independent Consultant. The links above to other companies/brands are for your convenience only. If you are located in the United States, Puerto Rico, Guam or on U.S. military bases and are interested in purchasing Close To My Heart products you may go to my CTMH Online Business Address where I receive a commission when people make purchases.
Thank you for visiting by my blog today.
On July 7 We R Memory Keepers shared Linda Parker’s Envelope Punch Board Treat Mug post on the WRMK Facebook Page. I watched Linda’s video during my lunch break, took some notes and when I got home that evening I created the base for the coffee mug in Cricut® Design Space.
Except for a couple of snips, all of the cutting and scoring, including the mug handle and the circle to cover the mug base, was done on the Cricut® Explore using the free Insert Shapes, but I did use the WRMK Envelope Punch Board so the bottom of the mug tapered. Honestly, I didn’t have the patience to repeatedly add a shape and use the slice feature to build the taper into the CDS file.
The green cardstock is from my stash; the printed paper is from the DCWV Nana’s Nursery Baby Girl stack.
If you would like to make your own mug, my CDS file is https://us.cricut.com/design/#/canvas/42546245; please watch Linda’s video for assembly instructions. Here is a screen shot of my CDS screen with the score line measurements added.
I am not sure, but I may use this idea for those I need to give small gifts to around the December holidays. The mug is large enough to also hold a gift card. Sweets and a gift card is something I would love to receive.
Thanks for stopping by today. I hope this gives you gift ideas.
In addition to Daylily Corner from Digistamps4Joy, I used the following products to create my card: Lyra Rembrandt Polycolor Pencils, Tattered Lace Sentiments 2014, Tattered Lace Torn Edge Rectangles, Embellishment Attic Pearl Droplets, card stock and a card base from my stash. “Birthday Wishes” was cut from Create and Craft Pack of Single Sided 50 A4 Mirror Board.
I used these pencil colors: 06 – Light Chrome, 08 – Canary Yellow, 28 – Rose Madder Lake, 27 – Light Carmine, 70 – Apple Green and 73 – Olive Green.
If Facebook Progressive Challenges are new to you, I hope you will purchase this month’s design and join us over at the Digistamps4Joy Stamping Facebook Group. It is fun to see the different ways folks use the same image.
FYI, the links above are not affiliate links, but for your convenience in case you like a product enough to learn more about it.
I love to learn what folks think of my creations, so if you have a minute please leave a comment. Thanks for visiting today.
A former neighbor and librarian I had in elementary school, who joined the staff of our district when my mother was in middle school, is celebrating her 91st birthday this week so I created a card for her. This is what the card will look like when she pulls it from the envelope.
This gatefold card was created using Anna Griffin’s Amelie Brocade Card Embossing Folder from the 12” Lace Gatefold Embossing Folders collection. There is a coordinating Anna’s Embossing Companion Lace Gatefold Cards Cut File in Cricut® Design Space. I first cut my cardstock from the Bazzill Basics 180-piece “Olivia” Premium Cardstock Kit (purchased at HSN; when it comes back it sells out quickly) then I ran it through the Cuttlebug. The belly band is a 1″ strip of printed cardstock from The Dear Jane Stack (DCWV). The green center “button” is from the Anna Griffin Embossing Folder and the peach cardstock is from the “Olivia” collection and cut with Torn Edge Circle Die by Tattered Lace. The button covers where the belly band is joined and helps to hide the sentiment inside the card until the band is remove. The card inside looks like this:
I used the same printed and peach cardstock inside the card. The printed cardstock was cut using my paper trimmer and the peach cardstock was cut using Spellbinders Nestabilities Large Labels (S4-168) and stamped with Black Memento™ Ink Pad (CTMH item #Z899) using a stamp from the Anna Griffin® Birthday Clear Stamp Set. I used Thin 3D Foam Tape (CTMH item #Z2060) to add the sentiment.
While I am not an affiliate for any shopping sites, I am a Close To My Heart Independent Consultant. The links above to other companies/brands are for your convenience so you do not have to search and search to find something you might like. If you are located in the United States, Puerto Rico, Guam or on U.S. military bases and are interested in purchasing Close To My Heart products I used you may go to my CTMH Online Business Address where, if you make a purchase, I will receive a commission.
I hope you and Florence, the recipient, find beauty in the card I created. Thank you for stopping by my blog today.
Instead of stamping all over the card front, I used a cut from the Cricut® and stamped the word happy. Also, rather than a flame coming from the top of the card, a balloon is the surprise.
I used the following products to create this card: Craftwork Cards Celebrations Stamps with Candle Cards, Birthday! (word) – #M3E80D from the Simply Sweet Cricut® cartridge, Jet Black Ranger Archival Dye Ink Pad and from Close To My Heart: Confetti Wishes Paper Pack – retired, Canary Cardstock (X5772), Paper Fundamentals – Adventure (Pacifica – balloon and pull tab back) – retired, My Acrylix™ Joyful Birthday stamp set (B1419) – retiring July 31, 2016, Marvy® Uchida® LePen™ Journaling Pen (Z1979) and Balloon – #M45A50 from the Cricut® Artiste Collection (Z3170) – retiring July 31, 2016. I used a 2″ scallop circle punch to create a notch. I also added a small piece of clear plastic packaging near the base of the balloon to make that narrow piece of cardstock a bit sturdier.
I am not an affiliate for shopping sites, but I am a Close To My Heart Independent Consultant. The links above to other companies/brands are for your convenience only. If you are located in the United States, Puerto Rico, Guam or on U.S. military bases and are interested in purchasing Close To My Heart products you may go to my CTMH Online Business Address where, if you make a purchase, I will receive a commission.
What do you think of this card in my series of “what can I think of next to slide out of the top of a card?” I hope you think it is pleasing to the eye. I do have other ideas that I will try as time allows. If you have a moment, please leave a comment. Thank you for visiting today.
In April I purchased the Baby Blue Accessories Collection (item 141921) when it was offered at a reduced price. If you like the cards I created from this kit, the Baby Blue 17 Piece Accessories Collection with FREE Tattered Lace Baby Blue (item 146584) is a better value right now. The following items were included in the collection I purchased: Rainbow Cardstock, Card Blanks, Envelopes, Foam Pads, three Butterflies dies, With Love and Best Wishes Die and a third die set not listed in the product description (I received a teddy bear holding a heart and a pacifier). Another item that was not listed in the description were four sheets with instructions for creating cards. Here are the cards from the instruction sheets. I followed the directions fairly close when creating the cards.
I did add my own green and yellow cardstock to create the “Best Wishes” sentiment on the card above left. It was the last card I created and when I looked at the scraps of rainbow card I had left I did not think I could find large enough piece where the color was fairly solid so the words would stand out. The words on the card above right are the letters that remained after creating the card below right.
Except for the shape (square cards need additional postage in the USA), I really liked the card bases in this kit. I needed to run my bone folder along the fold to make it more crisp, but the cardstock is so smooth and silky. There was a more than adequate supply of thin Foam Pads in the kit; I still have about 80% of the Foam Pads remaining. I called them thin because they are thinner than most of the foam pads and tape I find in big box stores. If you are familiar with Thin 3-D Foam Tape (Z2060) from Close To My Heart, the thickness is about the same.
A note about the Baby Blue – I have it, but did not purchase it as part of one of the collections it is available in now. I find that I am able to cut simpler dies in it easily, but more intricate dies, like the butterflies in this kit, need to be run through the machine more than one time and/or need to be shimmed. If you have more questions about the Baby Blue, Tattered Lace has a Baby Blue Die Cutting Machine page where you will find the Instruction Manual and a Step-by-Step Guide (both are PDF files), Create and Craft posted a Baby Blue Machine FAQ Guide and Ken Hess wrote a review on his blog and posted a video review.
I hate to keep repeating myself, but I do not want anyone to feel mislead. I am not an affiliate for any shopping site, but I am a Close to My Heart Independent Consultant. If you are located in the United States, Puerto Rico, Guam or on U.S. military bases and are interested in purchasing Close To My Heart products you may go to my CTMH Online Business Address where, if you make a purchase, I will receive a commission.
Thank you for visiting today. Even though I did not design the cards I created, I hope that you like how they turned out.